基于直接数据域自适应算法的相干信号DOA估计

利用直接数据域自适应算法的稳态权值代替噪声子空间构建空间谱,构造了一种超分辨波达方向(DOA)估计方法.为了解决谱峰搜索时的伪峰问题,采用参考阵元轮换得到多组线性无关稳态权值,逼近噪声子空间,能有效去除伪峰.针对相干信号的DOA估计,进一步提出了直接数据域取对称共轭向量的解相干方法.相比子空间分解类算法,本文算法不需估计信号源数目和协方差矩阵、不需特征分解,复杂度仅为O(MP),同时能有效完成解相干处理.     

声场干涉条纹图像的降噪研究与性能仿真

引导源目标定位算法形成的声场干涉条纹图像中常附带有噪声,这对定位性能的影响非常大。为了实现低信噪比条件下对目标的准确定位,根据算法仿真结果的特点,提出了利用小波阈值去噪法对图像进行降噪处理。针对软硬阈值去噪的不足,采用了阈值函数的改进方案。对小波去噪后图像再进行二值化设置,能有效提高算法去噪效果。仿真结果表明小波降噪处理能有效提高引导源目标定位算法在低信噪比条件下的定位性能。     

基于二阶锥规划的MIMO雷达稳健自适应波束形成

针对MIMO雷达自适应波束形成中期望目标导向矢量的失配问题,提出了一种基于二阶锥规划(SOCP)的稳健自适应波束形成算法。该算法首先将1个MN维(M,N分别为发射和接收阵元数)的权矢量分解成2个低维(1个M维和1个N维)权矢量的Kronecker积,然后分别限制实际的目标发射导向矢量和目标接收导向矢量与假定的导向矢量之间的误差范数的边界,通过优化最差性能,利用SOCP求得分解后的2个权矢量,最后再合成原权矢量。通过降维处理,算法在保证波束形成器性能的基础上,有效地降低了运算复杂度。仿真结果验证了算法的有效性。     

Cyclic scheduling in robotic flowshops with bounded work‐in‐process levels

This study addresses cyclic scheduling in robotic flowshops with bounded work‐in‐process (WIP) levels. The objective is to minimize the cycle time or, equivalently, to maximize the throughput, under the condition that the WIP level is bounded from above by a given integer number. We present several strongly polynomial algorithms for the 2‐cyclic robotic flowshop scheduling problems for various WIP levels. © 2010 Wiley Periodicals, Inc. Naval Research Logistics 58: 1–16, 2011     

三种实时误差配准算法性能分析与比较

对雷达组网中现有的三种实时误差配准算法即扩维扩展卡尔曼滤波算法(Augmented State Extended Kalman Filter)、解耦卡尔曼滤波算法(decoupled Kalman Filter)和准确算法(Exact method)进行了介绍与分析,并通过蒙特卡罗仿真试验从算法估计的均方根误差、估计的...     

陆军作战复杂系统ABMS机理研究

研究陆军作战复杂系统,需要解决两个不可回避的基本问题。一是怎样利用复杂性理论研究陆军作战系统的复杂性,即怎样借鉴复杂性理论构建复杂性思维模式。要解决这个问题,首先必须弄清复杂性理论概念的核心原理。二是在复杂性思维模式下,怎样进行陆军作战复杂系统的ABMS。要解决这个问题,首先必须弄清陆军作战复杂系统ABMS的机理所在。就这两个问题,在研究复杂性理论概念核心原理的基础上,构建了复杂性思维模式框架——复杂性分析二维结构,并由此探索了陆军作战复杂系统ABMS的机理:二维结构、"四个要素"、基本过程和陆战Agent模型框架,为陆军作战复杂系统的ABMS奠定了基础。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

Coordinated scheduling of customer orders for quick response

The scheduling problem addressed in this paper concerns a manufacturer who produces a variety of product types and operates in a make‐to‐order environment. Each customer order consists of known quantities of the different product types, and must be delivered as a single shipment. Periodically the manufacturer schedules the accumulated and unscheduled customer orders. Instances of this problem occur across industries in manufacturing as well as in service environments. In this paper we show that the problem of minimizing the weighted sum of customer order delivery times is unary NP‐hard. We characterize the optimal schedule, solve several special cases of the problem, derive tight lower bounds, and propose several heuristic solutions. We report the results of a set of computational experiments to evaluate the lower bounding procedures and the heuristics, and to determine optimal solutions. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

精确制导弹药低成本制导控制系统设计

针对精确制导弹药制导控制系统低成本的迫切需求,提出了一种弹载低成本制导控制系统设计方法。建立了一种弹载制导控制系统低成本体系架构,从功能、硬件、软件等方面对其进行了GNC一体化设计,并在此基础上提出了一种基于ARM处理器的一体化制导计算机设计方法。针对MEMS导航系统精度低、噪声大特点,设计了一种惯性/卫星数字制导方案。该低成本制导控制系统设计方法可有效减少系统冗余硬件,降低成本,实现较高的制导控制精度,满足未来低成本精确制导武器的需求。     

基于马尔可夫预测的低消耗弹药库存仿真建模分析

应用马尔可夫方法的无后效性原理,建立了低消耗弹药库存的预测模型,为该类弹药的年度供应提供依据。在模型建立的基础上,对其仿真算法进行了描述,并应用计算机进行了仿真实现。